Connection/Measurement - HBM QuantumX Manuel D'emploi

MX809B
DANGER
Risk related to fire:
The protection provided by the device can be impaired if
the module supply voltage does not comply with the
requirements of IEC 60950-1 for a SELV supply.
5.2

Connection/measurement

► Make sure that all voltage sources that are dangerous
to touch are switched off and secured to prevent them
being turned back on.
► Check that all components that are potentially danger­
ous to touch are safely isolated from the supply.
► Install measuring leads pre-wired as shown in 5.4 in
accordance with the stipulations in the same section.
Notice
Otherwise, proceed in accordance with the QuantumX
Assistant documentation.
A3757-2.2 HBM: public
MX809B operation
29