Symbols On The Measurement Module; Intended Use - HBM QuantumX Manuel D'emploi

Safety instructions
Symbol
8
2.2

Symbols on the measurement module

Significance
Statutory waste disposal mark
see Section 6 "Waste disposal and environmental protection"
page 47
Statutory mark of compliance with emission limits in electronic
equipment supplied to China
see Section 6,
"Waste disposal and environmental protection", page 47
CE mark
The CE mark enables the manufacturer to guarantee that the
product complies with the requirements of the relevant EC
directives (the Declaration of Conformity can be found on the
HBM website (www.hbm.com) under HBMdoc).
This marking requires you to read and comply with the operat­
ing manual, before operating the device.
Connection for functional earth
If necessary, integrate the measurement module into your
functional grounding via this connection so that interference
currents can be discharged and interference signal injection
prevented.
2.3

Intended use

The MX809B measurement module fits seamlessly into
the modular QuantumX series and is used solely to
record temperatures via thermocouples and acquire elec­
tric voltages for conversion to digital data within the rat­
ings stated in the "Specifications" section and under the
conditions given in the same section.
A3757-2.2 HBM: public
MX809B