Operating Conditions - HBM QuantumX Manuel D'emploi

MX809B
2.5

Operating conditions

S See the specifications for the permissible operating
temperature, as well as the permissible storage and
transportation temperatures. If the MX809B has been
stored or transported in extreme temperatures, you
must wait for at least 2 hours before switching it on.
S Do not expose the measurement module to direct
sunlight.
S The operating position is optional.
S Protect the measurement module against direct con­
tact with water and moisture, as well as weather con­
ditions such as rain or snow. Should condensation
have formed during transportation or storage, the
MX809B must be acclimatized for at least 2 hours,
before being put into operation.
S Do not operate the measurement module above the
maximum operational height of 2000 m.
S The MX809B is designed for use in clean and dry
rooms with degree of pollution 2, and cables must not
be routed through outdoor areas either. It must not be
operated where the air has a particularly high dust
content, where there is a risk of explosion, or in an
aggressive chemical environment.
DANGER
If the measurement module is used outside the rated
operating conditions, the protection provided by the mea­
surement module may be impaired.
A3757-2.2 HBM: public
Safety instructions
13