Mx809B Operation; Preparatory Measures And Start-Up - HBM QuantumX Manuel D'emploi

MX809B operation

5 MX809B operation
NTX001
28
5.1

Preparatory measures and start-up

► Install a QuantumX application (such as the
QuantumX Assistant) on a PC.
► Use FireWire or Ethernet to establish a physical data
link between the MX809B and the PC.
► Supply the MX809B with a DC voltage of 10 V ... 30 V
(24 V recommended).
The DC voltage supply must be a SELV voltage
supply, meeting the requirements of IEC / EN / DIN EN
60950­1. If necessary, the supply voltage must be
protected by an adequate DC fuse (e.g. LITTELFUSE
KLKD 6, LFPHV001).
Or
1-Kab271-3
1-Kab269
FireWire
► Make sure that all the disconnecting devices and the
emergency stop and emergency OFF devices are
easily accessible and can be reached by third parties.
A3757-2.2 HBM: public
MX809B