HBM QuantumX Manuel D'emploi page 301

3 General
Copper Mini
Thermokcouple
ITC-U1001
The ITC-U1001 voltage measuring lead comes ready to
install. When the voltage measuring lead bead is in con­
tact with voltages that could be a contact hazard, com­
prehensive protection is provided in accordance with EN
61010.
The ITC-U1001 consists of measuring wires, measuring
lead and a type Cu mini thermocouple connector fitted
with an HBM Thermo Mini insulating cap so it is safe to
touch.
HBM insulating cap
(reusable)
The wire insulation is slightly pushed back after 5 mm to
enable the wire insulation to be removed without tools.
In combination with the HBM isolation cap, personal pro­
tection up to 1000 V (CAT II: 600 V, CAT III 300 V) is
guaranteed for the voltage measuring lead.
The safety of the voltage measuring lead has been
verified by VDE and confirmed in accordance with
EN 61010-031 (ID no. 40044716).
A4749-1.0 HBM: public
measuring lead
General
Braids
15