Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Getting Acquainted
with RotoPol
Back of RotoPol
Unpacking RotoPol
Placing RotoPol
RotoPol-21/-22/-25
Instruction Manual
Take a moment to familiarise yourself with the location and
names of all the RotoPol components:
A
Front panel control(s)
B
Main switch
C
Water taps with sprinkler tube and turntables
Water inlet tube
Water outlet tube
Socket for specimen mover
Socket for recirculation cooling unit
All RotoPol models are detached from the bottom of the packing
case by removing the four screws from below.
RotoPol should be placed on a steady table with an adequate
working height. The machine must be close to the power supply,
water mains and water outlet facilities. If water recirculation is
used, there must be room under the table for the Recirculation
Cooling Unit (TRECI).
5
Publicité
Chapitres
Table des Matières
