Enraf Nonius EN-DYNAMIC Manuel D'utilisation page 39

On the bottom of the screen select if you want
to record both ROM and speed or just ROM.
Perform two repetitions. Limits for ROM (and
speed) will be recorded to be used as an
example for the next training session.
Few seconds after the recording is finished,
the EN-Dynamic will return to the training
screen.
Limits for ROM are now shown on the ROM-
bar. Moving outside this ROM will be shown
in red to indicate the movement is not
executed like recorded.
Record
A bar at the bottom of the screen will
display the range of motion (ROM).
Touch this area to set markers for the
right ROM, start and finish for the
movements.
A screen will open to record two
correctly executed repetitions.
If speed is recorded as well, the speed
bar will show a "ghost" to indicate the
required speed.
If you want to change the ROM or
speed, just press the area with the bars
to start a new recording.
Reset will delete all set parameters for
your training including ROM and speed.
Page 11 of 26 EN109-1412791-48 IFU