Enraf Nonius EN-DYNAMIC Manuel D'utilisation page 36

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Maintain your devices according to the prescribed guidelines (see chapter Cleaning and
maintenance).
Caution
EN-Dynamic is powered by internal power supply, the pneumatic resistance is fed by
compressed air. Use only Enraf-Nonius supplied or prescribed spare parts. A wrong voltage or
a wrong pressure can result in damage of the unit, or it may result in increased emissions or
decreased immunity of the EN-Dynamic.
The manufacturer of the compressor advises frequent maintenance and the use of special oil
lubricants. To prevent malfunction follow the instructions in the service manual of the
compressor.
Take care to prevent the compression of electrical circuits wires and air tubes between the
moving parts and the unit itself.
The device is not intended for use in so-called "wet rooms" (hydrotherapy rooms).
Note
The maximum resistance setting for the training equipment will be dependant on the pressure of
the compressor.
In case of any malfunction of your EN-Dynamic unit contact your Enraf-Nonius supplier or Enraf-
Nonius B.V. (Rotterdam, The Netherlands). Have repairs, maintenance and installations carried out
by an authorized Enraf-Nonius service technician.
Repairs or maintenance performed by a non Enraf-Nonius authorized service technician and/or
the use of (spare) parts that are not originally Enraf-Nonius made, results in a direct loss of any
guarantee.
Page 8 of 26
EN109-1412791-48 IFU

Publicité

Table des Matières
loading

Table des Matières