Power Supply Electrical Connection; Figure 4: Connection Of Pump External Capacitors; Figure 5: Electrical Connection To The Supply Line - DAB E.Box Plus Instructions Pour L'installation Et La Maintenance

The capacitors must be connected as shown in Figure 4. Take care because in the E.Box Plus they share the same terminal as the pump.
2.3

Power supply electrical connection

Before starting work, disconnect the power from the supply line. Use cables with a suitable size for the currents involved, considering
that the in-line current is the total of the currents on the pumps.
In the case of single-phase power supply use terminals L and N. In the case of three phase power supply use terminals L1, L2, L3. See Figure 5
Electrical connection to the supply line.
Connect the earth cables of the pumps to the earth terminals in the E.Box panel!
ENGLISH

Figure 4: Connection of pump external capacitors

Figure 5: Electrical connection to the supply line

70