Amplification Factor Kp; Integral Action Time Tn - Burkert 8624 Instructions De Service

7.3.8 Amplification factor KP

è Select an amplification factor KP in the setting range between 0 and 99.99.
Setting the pre-comma value of the amplification factor
Setting the post-comma value of the amplification factor

7.3.9 Integral action time TN

è For the integral action time TN, select a value between 0.1 and 199.99 sec.
Setting the pre-comma value of the integral action time TN
Setting the post-comma value of the integral action time TN
After setting the integral action time TN, the parameters are accepted and
the return to the standard mode takes place.
40
Increase of the pre-comma value
Proceed to set the post-comma
value
Increase of the post-comma value
Continue from 7.3.9
Increase of the pre-comma value
Proceed to set the post-comma
value
Increase of the post-comma value
Change to standard mode
Type 8624