Inverted / Not Inverted; Selection Of The Default Set-Value - Burkert 8624 Instructions De Service

7.3.4 Inverted / Not inverted

èSelect between inverted or non-inverted operation of the controller.
Non-inverted control
direction selected
continue from 7.3.5
Figure 9: Selection between inverted or non-inverted control direction

7.3.5 Selection of the Default Set-value

è Select here whether the unit should work with an internal or an external
default set-value.
The selection will be indicated in the upper row of bars.
Internal default set-
value selected
(see 7.3.6)
Figure 10: Selection between internal and external set value
Operating Manual No. 800 215
not inverted
Inverted control
direction selected
External default set-
value selected
(Standard signal)
(see 7.3.7)
inverted
37