SICE S50A Mobile Manuel D'instructions page 54

pneumatico.
Press the bead breaking roller against the tyre.
Premere il rullo stallonatore contro lo pneumatico.
ATTENZIONE: per uno smontaggio semplice e sicuro è indispensabile lubrificare lo pneumatico.
WARNING: for a simple and safe demounting, it is essential to lubricate the tyre.
Facendo girare la ruota in entrambi i sensi, lubrificare abbondantemente la zona del tallone e premendo delicatamen- te sul tallone
Making the wheel turn in both direction, thoroughly lubricate the bead area and gently press on the bead to remove it
per staccarlo dalla ruota.
from the wheel.
20
After releasing the bead, remove the bead breaking roller from the tyre.
Repeat the last three operations for the internal bead.
Use moving closer/moving away and lifting/lowering controls to move the roller until it sits into place on the tyre side.
The rim edge must not be at more than 5 mm (3/16") from the upper end of the bead breaking roller.
54
AGT TILT Manuale
S50A Mobile Operator's Manual