Leica Microsystems DMI3000 B Mode D'emploi page 78

7. Start-up
Note:
To avoid adjustment errors, neighboring fi lter
cubes must also be removed.
• Turn the refl ector into the beam path.
For Leica DMI4000/6000 B: The refl ector is cor-
rectly positioned when the LeicaScreen shows
the designation of the replaced fi lter cube.
Caution!
Never look directly into the beam path!
Beware of the glare hazard when switching to
refl ector BF or Smith!
Fig. 98 Lamp housing 107 L
1 Mounting for housing
2 Screw for vertical adjustment
3 Button for horizontal adjustment
4 Collector focusing
1 2
78
4
3
Fig. 99 Refl ector cube for lamp adjustment