Leica Microsystems DMI3000 B Mode D'emploi page 36

6. Assembly
Manual Fixed Micromanipulation Stage
To install the attachable mechanical stage for the
manual fi xed micromanipulation stage (Fig. 24),
proceed as you would for the attach able me-
chanical stage of the standard stage.
The insert frames (Fig. 20a to c) differ at this point.
These are held by two screws on the attachable
mechanical stage and changed by re leasing the
screws.
Fig. 21
Inserts for fi xed stages
Fig. 22
Glass insert for
3-plate cross-stage
and scanning stage
Fig. 23
Heater insert
36
Fig. 24 Installation of attachable mechanical stage
Fig. 25 Installation of attachable mechanical stage