Leica Microsystems DMI3000 B Mode D'emploi page 49

Inserting Gas Discharge Lamps (Hg and Xe) in
the 106z Lamp Housing
Hg and Xe lamps are powered by separate sup-
ply units.
Please also read the separate instruction manual
provided with these supply units.
The following gas discharge lamps may be used
and require different supply units and lamp
mounts (Fig. 60, 61):
Type
100W high-pressure mercury burner (direct current)
100W high-pressure mercury burner (direct current, type 103 W/2)
75W high-pressure xenon burner (direct current)
* Please observe the data sheets of the lamp manufacturer.
Fig. 60 Lamp mounts for Hg 100 gas discharge lamp
1 Upper clamping system
2 Lower clamping system
3 Cooling element
Hg 100
1
2
Fig. 61
1 Upper clamping system
2 Lower clamping system
3 Cooling element
4 Protective cover of Xe 75 burner
a
Xe 75
3
Typical Bulb Life*
Lamp mounts for gas discharge lamp Xe 75
1
2
6. Assembly
200 hrs.
300 hrs.
400 hrs.
b
3
4
49