Leica Microsystems DMI3000 B Mode D'emploi page 35

Fixed Stage
Attachable mechanical stages designed to ac-
cept a variety of culture dishes are also available
for fi xed stages (Fig. 18).
Two screws are included with the attachable
mechanical stage. Tighten these screws in the
threaded holes on the underside of the fi xed
stage with the 3 mm hex screwdriver. Retighten
these screws from time to time after frequent
use.
The attachable mechanical stage has been pre-
adjusted in the factory. In the event that the at-
tachable mechanical stage runs out of focus
when moving from right to left, this can be cor-
rected by Leica's technical service.
Next, remove one or more of the ordered insert
frames (Fig. 20) from their packaging and place
Fig. 19 a, b Inserts for attachable mechanical stage
(fi xed stage)
the insert frame into the precise retention sys-
tem. The stage, the attachable mechanical stage,
and the insert frame are now ready for use.
Some (not all) inserts are provided with self-
adhesive scales to permit the coordinates to be
read.
Apply these scales to the recesses of the attach-
able mechanical stage.
Fig. 20 a, b, c
Inserts for attachable mechanical stage (micromanipulation
stage)
a
b
6. Assembly
a
b
c
35