Assembling The Microscope; Assembly Tools - Leica Microsystems DMI3000 B Mode D'emploi

6. Assembly

6. Assembling the Microscope

The microscope components* are logically as-
sembled in this order:
• Transmitted light illumination carrier
• DIC module and DIC objective prisms
• Condenser with condenser head
• Eyepieces
• Objectives
• Transmitted light lamps
• Lamp housing mount (mirror housings)
• Incident light lamps
• Assembly of incident light turret disk
• Specimen stage
• Polarizer and analyzer
The order may be vary when using climate cham-
bers or other systems and optical accessories.
In this case, read Chapter
„6.16 Optional Accessories" → p. 57.
30
* depending on scope of delivery

6.1 Assembly Tools

If possible, the microscope should be assembled
and set up with the assistance of Leica sales or
service personnel.
A small number of universal screwdrivers which
are included in the scope of delivery are required
for assembly (Fig. 7).
Fig. 7 Assembly tools
1 Phillips screwdriver*
2 3 mm Allen key
3 1.5 mm centering key*
4 2 mm centering key*
5 3 mm hex key*
6 2.5 mm hex key* (short type)
7 2.5 mm hex key*
1
3
4
2
5
6
2
7