Clear The Settings - SOMFY FREEVIA LINE Manuel D'installation Et D'utilisation

EN

6.3 Clear the settings

When should I delete the settings?
• A er auto-programming, if you change the position stop, if you change the motor wiring or if you
add a safety edge to the gate.
• If the gate opens at random due to normal wear of the gate.
1 2
>2s
• Place the
• Press the
memorised
button on
remote control
the control
against
electronics for
the control
2 seconds. The
electronics.
indicator light
comes on.
To clear the settings*
6
7
3
• Keep button
1 of the
remote control
depressed until
the indicator
light
• Keep button 2 of
the remote control
depressed until the
"RESET" indicator
light comes on.
EN - FREEVIA LINE installation and operating guide - SOMFY
4
x2
• Press button 1
on the remote
control twice.
flashes.
To clear the settings* and the
memorised remote controls/control
points
6
The indicator light flashes twice (see
page 15 to run a self-learning procedure).
*Gate travel, deactivation of the settings, ...
Repairs
5
The "RESET"
indicator light
flashes.
• Keep button 2 of
the remote control
depressed until the all
the indicator lights
come on.
6
31