Ambient Light Detector; Clear The Settings; Clear The Stored Settings And Remote Controls - SOMFY AXOVIA 220B RTS Manuel D'installation

EN

13.1. Ambient light detector

The motor's electronic unit is fitted with an ambient light detector which
detects whether or not the cover is fitted. This means that settings mode is
only available when the cover is removed. If the cover is fitted, the motor
is in standby mode.
=
=

13.2. Clear the settings

The cleared settings are: the gate leaf travel and automatic closing of the
gate.
13.2.1. When to clear the settings
A er the gate leaf travel has been programmed, if the opening stop setting
or motor wiring has been modified.
In the event of spurious obstacle detection because of normal wear on
the gate.
1) Place a 2- or 4-button stored remote control on the target engraved
on the cover.
2) Press button 1 of the remote control until the
flashes.
=
=
RESET
RADIO
3) Press button 1 on the remote control once.
The RESET indicator light flashes.
=
=
RESET
RADIO
4) Press button 2
til the RESET indicator light comes on.
Release button 2.
The indicator light flashes.
=
=
=
=
RESET
RADIO
15
Ambient light
detector
indicator light
=
=
RESET
RADIO
=
=
RESET
RADIO
on the remote control
= =
= =
RESET RESET
RADIO RADIO
13.3. Clear the stored settings and remote con-
trols
The cleared settings are:
• the travel of the leaves,
• activation of the gate's automatic closing
• all the stored remote controls or radio control points.
1) Place a 2- or 4-button memorised remote control on the target en-
graved on the cover.
2) Press button 1 on the remote control until the
flashes.
=
=
RESET
RADIO
3) Press button 1 on the remote control once.
The RESET indicator light flashes.
=
=
RESET
RADIO
4) Press button
the indicator lights come on.
Release button 2.
The indicator light flashes.
=
=
=
=
RESET
RADIO
un-
=
=
RESET
RADIO
=
=
RESET
RADIO
2 on the remote control
=
=
RESET
RADIO
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
Axovia 220B RTS
indicator light
until all
=
=
RESET
RADIO