Clearing The Remote Controls; Reinitialising The Settings - SOMFY GDK 700 Notice D'installation Et D'utilisation

> Memorising a Telis type remote control or similar (not supplied in the kit)
1
• Press "B" for 2 seconds.
The integrated lighting comes on.

2.5 Clearing the remote controls

This procedure causes all memorised remote controls to be cleared.
• Press "B" for 7 seconds. The integrated lighting

2.6 Reinitialising the settings

To reinitialise all settings, simply run a new auto-programming process (see page 15).
2
• Using a thin implement, press the "prog "button" on the
back of the remote control.
•
The remote control has been memorised.
All the remote controls and all the settings are now cleared.
EN - GDK installation and operating guide - SOMFY
2
Programming
21