Fully Opening And Closing The Gate; Obstacle Detection - SOMFY FREEVIA LINE Manuel D'installation Et D'utilisation

2.6 Fully opening and closing the gate

The remote controls supplied with the kit are already
memorised and programmed so that button 1 on the remote
controls activates full opening of the gate.

2.7 Obstacle detection

If an obstacle is detected (abnormal force on the motorisation):
• When the gate is opening: the gate will stop.
• When the gate is closing: the gate will stop and reopen.
Commissioning and standard use
Button 1
• Gate closed: press button 1 on the remote
control to open the gate to the full.
• Gate moving: press button 1 on the remote
control to stop the gate.
• Gate open: press button 1 on the remote control
to close the gate.
EN - FREEVIA LINE installation and operating guide - SOMFY
2
17