4 ADVANCED PARAMETER SETTINGS
4.1 Pedestrian opening
Pedestrian opening operation
Pressing the remote control button programmed to open the pedestrian opening causes the date to
open about 1 metre. Pressing it again causes the gate to close.
Activating the pedestrian opening
Button 1 on 2- or 4-button remote controls cannot be programmed to control pedestrian opening.
See "Programming the remote controls", pages 27-29, for more information.
1
• Press on the
the control electronics for 2
seconds.
The indicator light
on.
Move away from the control electronics to test the pedestrian opening.
Deactivating the pedestrian opening
Repeat the "Activate pedestrian opening" procedure using the button for which the pedestrian opening
must be deactivated. The indicator light
deactivated on this button.
22
EN - FREEVIA LINE installation and operating guide - SOMFY
1m
2
>2s
• Place the remote control
button of
against the control electronics.
comes
<0,5 s
comes on then goes out. The pedestrian opening is
3
• Press button 2 on the remote
control.
The "RADIO" and
indicator
lights come on then go out.
The pedestrian opening is
activated on this button.