Tools Require For Installation (Not Provided); Screws Etc. Required For Installation Of The Rack And Pinion (Not Provided) - SOMFY FREEVIA LINE Manuel D'installation Et D'utilisation

Tools require for installation (not provided)

17
3,5
T25
PZ2
10

Screws etc. required for installation of the rack and pinion (not provided)

This information is provided for information purposes.
Screws etc.
required
Self-drilling hex-head
screw for metal of type
ST 6.3 x 30 mm
+ washer
PVC is tool fragile to fasten the rack and pinion directly.
PVC gates generally have an aluminium or metallic brace or a steel core
(see the line above).
If a PVC gate does not have a brace: fasten a metallic brace to the gate where the rack and pinion will be
fastened.
Wood screws, diameter
6 x 40 mm minimum +
washer
8
EN - FREEVIA LINE installation and operating guide - SOMFY
Tools required
Socket wrench no.10
Socket wrench no.10
12
Drilling diameter
5 mm with a drill for steel
Make a starter hole with a wood drill, diameter
2.5 mm or wood auger.