D Technical Data - Corghi Artiglio Master J Manuel D'utilisation

For correct equipment operation, the air produced must be suitably treated (not
above 5/4/4 according to ISO 8573-1).

1.2.d TECHNICAL DATA

- Type of tyre
- Wheel size range:
• rim diameter ................................................................................................ from 12" to 26"
• maximum tyre diameter .............................................................................. 1100 mm (40")
• maximum tyre width ..................................................................................... 360 mm (14")
- Turntable: ¹
• automatic positioning in relation to .......................................................................... tools
• resting side ................................................................................................................flanged
• centring ..................................................................................................................... on cone
• clamping ..................................................manual (automatic for "AUTOMATIC" version)
• drive system .................................................................................. 2-speed motor-inverter
- Bead breaker:
• bead breaking force ................................................................................................... 7600N
- Power supply:
• operating pressure: ...............................................................................................8 -10 bar
• minimum air flow rate: ...................................................................................... 140 Nl/min
- Drive systems
Model Motor Rating
190Hz 230V/1ph 50/60Hz MI
190Hz 110V/1ph 50/60Hz MI
- Lifter:
• max capacity .................................................................................................................. 85 kg
- Weight ........................................................................................ 450 kg(T.I. version 465 kg)
- Noise level:
• A­weighted sound pressure level (LpA) at the working position ................< 70 dB (A)
The noise levels indicated correspond to emission levels and do not necessarily represent
safe operating levels. Although there is a relationship between emission levels and exposure
levels, this cannot be used reliably to establish whether or not further precautions are neces-
sary. The factors which determine the level of exposure to which the operator is subject to
include the duration of the exposure, the characteristics of the workplace, other sources
of noise, etc. The permitted exposure levels may also vary according to the
country. However, this information will enable machine users to make a more accurate assessment
of hazard and risks.
106
WARNING
Rotation
kW speed Torque Nm
rpm
0.98 7 - 18
0.98 7 - 18
Artiglio Master J Operator manual
CONVENTIONAL – LOW PROFILE -
RUN FLAT - BALLOON - BSR
Weight of
electric/electronic
part kg
1100
1100
10.2
10.2