Installation; Introduction; Purpose Of The Manual; For Your Safety - Corghi Artiglio Master J Manuel D'utilisation

1. INSTALLATION

1.1 INTRODUCTION

1.1.a. PURPOSE OF THE MANUAL
The purpose of this manual is to provide the instructions necessary for optimum operation,
use and maintenance of your machine. If the machine is resold, provide this manual to the
new owner. Furthermore, ask the new owner to fill out the ownership transfer module at-
tached to the previous page in the manual and send it to Corghi, so that Corghi will be able
to provide the customer with all necessary safety information. Alternatively, the new owner
can inform Corghi by sending an email to service@corghi.com.
This manual assumes that the technicians have full understanding regarding the identification
and maintenance of rims and tyres. They must also have thorough knowledge regarding the
operation and safety features of the relative tools (such as the rack, lift or the jack) that are
used, as well as the manual or electric tools required to perform the work safely.
The first section explains the basic information regarding the safe operation of the Master
J tyre changer family. The following sections contain detailed information regarding the
equipment, procedures and maintenance. Italics is used to refer to specific parts of this
manual that offer additional information or clarifications.
These references must be read in order to obtain additional information about the instructions.
The owner of the tyre changer is the only person responsible for the observance of the
safety procedures and the organisation of technical training. The tyre changer must only be
used by qualified, specifically trained technicians. The owner or management is exclusively
responsible for storing the documentation relative to qualified personnel.
The family of Master J tyre changers is designed for mounting, demounting and inflating
tyres for light vehicles (automobiles, not trucks or motorcycles) with a maximum external
diameter of 40 inches and a maximum width of 14 inches.
Additional copies of this manual and the documentation enclosed with the machine can be
requested from Corghi, specifying the machine type and serial number.
WARNING: The design details are subject to change. Some illustrations may be slightly
different than the machine in your possession.

1.2 FOR YOUR SAFETY

DESCRIPTION OF THE HAZARD
These symbols identify situations that could be harmful to the safety of personnel and/
or cause damage to the equipment.
Artiglio Master J Operator manual
96