Assembly/Handling - Corghi Artiglio Master J Manuel D'utilisation

3. ASSEMBLY/HANDLING

Pay careful attention when unpacking, assembling, handling and installing the ma-
chine as described below. Failure to observe these instructions could damage the
machine and compromise operator safety.
Before removing the machine from the pallet, make sure the items shown below have
been removed.
- Remove the upper part of the cardboard pack-
aging and make sure the machine has not been
damaged during transport. identify the fixing
points (Fig.4 - "F") on the pallet
- In the packaging, the machine consists of 8 main parts (Fig.5):
A) Wheel lifter (optional) removing the brackets
B) Included equipment
C) Filter
D) Cover unit packaging
E) Bead pressing tool
F) T.I. unit (optional)
110
WARNING
WARNING
Artiglio Master J Operator manual
F
F
4