Transport, Storage And Handling; Unpacking - Corghi Artiglio Master J Manuel D'utilisation

2. TRANSPORT, STORAGE AND HANDLING

Conditions for transporting the machine
The tyre changer must be transported in its original packaging and stowed in the position
shown on the packaging itself.
- Packaging dimensions:
• width ...............................................................................................................................1240 mm
• depth ..............................................................................................................................1500 mm
• height ..............................................................................................................................1840 mm
- Weight of wooden crate:
• Standard version ................................................................................................................520 kg
• TI version ..............................................................................................................................535 kg
Machine storage and shipping specifications
Temperature: -25° - +55°C.
Do not stack other goods on top of the packaging or damage may result.
Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing itself
(pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/
HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be
shipped in the future.

2.1. UNPACKING

Remove the upper part of the packaging and make sure the machine has not been damaged
during transport.
Artiglio Master J Operator manual
WARNING
WARNING
3
EN
109