Corghi Artiglio Master J Manuel D'utilisation page 138

6 - During movement, press the button
configure the fixed tool or the mounting phase
of the upper bead (Fig. 38C).
7 - Operate the handle P (Fig. 38D) to manually
lower the upper bead breaker disc.
8 - Operate the lever
and manually adjusting the tyre into position
(Fig. 38E).
9 - Push the tyre
(Fig. 38E).
10- Use the bead pressing tool (Fig. 38F) and, if
necessary, bead pressing pliers (Fig. 38G) on
the rim shoulder, ensuring that the upper bead
is in the well.
138
lowering the tool
under the shoulder level
38F
to
Artiglio Master J Operator manual
38C
P
38D
A
38E
38G