Tyre Inflation - Corghi Artiglio Master J Manuel D'utilisation

6.12.b. TYRE INFLATION
1. Make sure the wheel is securely clamped on the
turntable by the centring handle (Fig. 40).
2. Make sure that the tool head, the upper and
lower bead breaking units and the bead pressing
tools are not near the work area and, if possible,
are in the rest position (see Fig. 40A).
3. Remove the valve core if it has not already been re-
moved (Fig. 40B).
4. Connect the air hose Doyfe inflator union to the valve
stem (Fig. 40C).
142
5. Press the pedal
intervals. Frequently check the pressure on the pres-
sure gauge (1, Fig.40D) to make sure that the pressure
NEVER exceeds the maximum pressure indicated by the
40C
manufacturer on the tyre. The tyre widens and the beads
are positioned.
to inflate the tyre at short
Artiglio Master J Operator manual
40
40A
40B