Pedal Unit; Wheel Lifter Pedal Unit (Optional) - Corghi Artiglio Master J Manuel D'utilisation

5.4.c. PEDAL UNIT
1 - Inflation pedal.
2 - Turntable rotation pedal.
The pedal has 4 different operating positions, each cor-
responding to a rotation speed.
- pedal raised (unstable position): slow anticlockwise rota-
tion. If the pedal is kept raised for more than 4 seconds,
rotation gets faster (always anticlockwise)
- pedal in the rest position (stable position): turntable stopped
- pedal gently pressed downwards (unstable position): slow clockwise rotation
- pedal pressed entirely downwards (unstable position): fast clockwise rotation
PEDAL UNIT ("AUTOMATIC" VERSION)
3 - Wheel locking/unlocking pedal.
In the automatic version is a third pedal.
Pressed to release the system which locks the turntable
centring handle. In its rest position, the system which
clamps the turntable centring handle is normally active.
The pedal is used during positioning and clamping of the
wheel on the turntable, and to release the wheel when
the job is done.
5.4.d. WHEEL LIFTER PEDAL UNIT
(optional)
1 - Pedal pressed (unstable posi-
tion): hands-on wheel lifting
2 - Pedal pressed (unstable posi-
tion): hands-on wheel lowering
122
1
1
Artiglio Master J Operator manual
2
22
3
22a
2
23