Publicité
Les langues disponibles
Les langues disponibles
before 60 minutes, press the on/off button (O) for 3 seconds.
17.
Unplug it from the electrical outlet and open the lid (G).
18.
Wear oven mitts and firmly grab the handle of the pan (L) turning it counterclockwise to release it and pull it
out (Fig 5).
19.
Allow to cool before taking the bread and then, using a non-stick spatula pull out the bread from the pan
starting from the sides. If necessary, overturn the pan on a cooling grid or on a clean surface and gently shake
until the bread comes out.
Warning
The pan becomes very hot. Be very careful when handling the pan, and always use protective gloves. Never
use metal utensils to remove the bread from the pan (L), in order to avoid damaging the non-stick coating.
POWER SUPPLY INTERRUPTIONS
If the power supply interruption lasts less than 10 minutes, the program will continue as soon as the power supply
is restored. If the interruption lasts more than 15 minutes, the program stops and the display returns to its default
settings. In this case disconnect the appliance from the electrical outlet, allow to cool, empty the pan, remove the
ingredients, clean and start again.
ERROR CODES
If an error occurs, the display (E) may show the following error codes:
"H:HH": the temperature inside the pan is too high.
1.
Press the On/Off button (O) for 3 seconds to stop the program.
2.
Unplug.
3.
Open the lid and allow the appliance to cool for 10-20 minutes.
4.
Restart the program.
"E:EO": the temperature sensor is disconnected or out of order.
Take the appliance to an authorized service center to check the operation of the sensor.
THE TIMER
The most common use of the timer is to prepare the bread during the night so that it is ready the next morning.
It is possible to program up to 15 hours preparation using the timer. Do not use for bread or dough containing fresh
milk, yoghurt, cheese, eggs, fruits, onions or any other ingredient which may deteriorate if left for a few hours on
a hot and humid environment.
Decide when you want your bread to be ready, for example at 6 a.m. Check what time it is when you start the
program, for example 9. Calculate the time between these two times, in this case 9 hours. By manipulating the
increase/decrease buttons (B), the timer will move forward or backward 10 minutes each time you press. It is not
possible to reduce the time required by a program.
9
Publicité
