Publicité
Les langues disponibles
Les langues disponibles
CARE & CLEANING
Warning
- Do not immerse the appliance, the plug or the power cord in water or other liquids. Clean with a damp cloth.
- Make sure the power cord has been unplugged before cleaning.
- Even when the appliance is not in use, unplug it from the electrical outlet before inserting or removing
individual parts or before cleaning it.
- Let it cool down before proceeding with the cleaning.
- Never use metal utensils to remove anything from the pan, because they can damage the non-stick coating.
- Never use metal utensils to remove the bread from the pan (L), in order to avoid damaging the non-stick
coating.
1.
Clean the pan (L) rubbing the inside and the outside with a damp cloth.
2.
If the kneading blade (I) does not come off from the motor shaft exceptionally fill the pan with hot water and
leave it for about 30 minutes. The blade must then be cleaned gently with a damp cloth.
3.
Wash the measuring cup (M), the measuring spoon (N) in hot soapy water.
4.
Clean all other surfaces, internal and external, with a damp cloth. Use a small amount of liquid detergent
if necessary, but be sure to rinse it completely, otherwise detergent residues could compromise the successful
outcome of your next bread
NOTE:
Do not use any abrasive material or sharp utensils to clean the Bread maker or any of its parts.
NOTE:
Allow all parts and surfaces to dry thoroughly before using the appliance again.
21
Publicité
