Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
Fig. 3
3.
Wash and dry well all components.
4.
Mount the kneading blade (I) on the pin inside the pan (L) (Fig 3).
5.
Measure the ingredients with the measuring cup (M) or spoon (N) supplied or weighing them and putting
them into the pan (L)
6.
Insert the pan on the appropriate pin inside the appliance, turn it clockwise to lock it (Fig 4.)
Warning
It is essential to follow the sequence of insertion of the ingredients as described in the recipe. Usually this
sequence is: liquid ingredients, water, flour, eggs and other as in the recipe. Pour the yeast at last into the
other ingredients. Avoid that the yeast is in contact with salt or liquid ingredients.
7.
Close the cover (G) and insert the plug into the electrical outlet. The display (E) will show "3:10", with two
fixed dots. The machine is automatically set to program "1".
8.
Press the button (D) to select the desired cooking program.
9.
Press the button (C) to select the desired weight (500g, 750g, 1000g). The weight cannot be set in programs
8-19.
10.
Select the browning to be obtained (slight, medium, or intensive). The browning cannot be set in programs
8-19.
11.
If necessary, set the timer with the + or - buttons (B). The processing will start after the time set. If you do
not set a time, the cooking will start immediately. Be careful when using the timer function with perishable
ingredients (such as eggs, dairy products, etc.).
12.
Press the On / Off button (O). The machine beeps and begins processing the ingredients (if a timer has been
set, processing will start at the time set). During cooking it is possible that steam comes out from the fan
under the lid (G): this is perfectly normal.
13.
If additions (nuts, seeds, etc.) are planned in the program, the machine emits 10 beeps when it is time to open
the lid and insert the remaining ingredients. This time varies according to the program.
14.
To stop the selected program, press the on/off button (O) for 3 seconds.
15.
When the time shown on the display (E) is "0:00", the cooking process is finished. The appliance will beep
10 times and will automatically switch to the "Keep warm" mode for 1 hour. The ":" symbol will keep
flashing (Except for the "Kneading" program).
16.
After keeping warm for 1 hour, the "keep warm" mode is deactivated. To disable the "keep warm" mode
8
Fig. 4
Fig. 3
Fig. 5
Publicité
