Ingersoll Rand A Série Manuel D'installation Et D'utilisation page 4

Rated Operating Pressure
Air System
Air Consumption
(at rated pressure and load)
Rated Performance
Mid Drum Line Pull
(at rated pressure /
Mid Drum Line Speed
volume) (1)
Sound Pressure Level (dBA) (2, 3)
Sound Power Level (dBA) (2)
Winch Overload Device Setting (4)
Winch Net Weight
(without wire rope)
Air Motor Port Inlet Size (NPT)
Minimum Air System Hose Size
Recommended Wire Rope Size
Maximum Wire Rope Size
Maximum Foundation Anchor Shear Force at
One Capscrew (5)
Drum Barrel Diameter
Drum Flange Diameter
Notes:
1. Performance based on 6.3 bar/630 kPa (90 psig) operating pressure.
2. Sound measurements have been made in accordance with ISO 11201, ISO 3744-3746 and ISO 4871 test specifications for sound from
pneumatic equipment. Readings shown are based on the average noise level of each winch configuration, proportionate to the utilized time in a
regular cycle.
3. Lpc (Peak Sound Pressure) does not exceed 130 dB.
4. Winch Overload Device is factory preset at 150% (+/- 25%) of the winch capacity at mid drum.
5. Occurs when wire rope takeoff from drum equals 0 degree angle of inclination. Values based on wire rope at third layer and rated line pull.
Performance Curves
SPECIFICATIONS
FA2A
380 scfm
4000 lbs
118 fpm
97 dBA
109 dBA
6000 lbs
Minimum 590 lbs
Maximum 753 lbs
1 inch
0.275 inch
0.625 inch
2050 lbs
9.25 inch
17 inch
FA2.5A
6.3 bar/630 kPa (90 psig)
10.8 cu. m/m 560 scfm 15.9 cu. m/m
1818 kgs 5000 lbs 2273 kgs
36 m/min 135 fpm 41 m/min
105 dBA
117 dBA
2722 kgs 7500 lbs 3402 kgs
268 kgs 670 lbs 304 kgs
342 kgs 836 lbs 379 kgs
25 mm 1.5 inch 38 mm
10 mm 0.275 inch 10 mm
16 mm 0.625 inch 16 mm
9120 N 2210 lbs 9830 N
235 mm 9.25 inch 235 mm
432 mm 17 inch 432 mm
3
FA5A
600 scfm 17 cu.m/min
10000 lbs 4536 kgs
60 fpm 18.3 m/min
97 dBA
108 dBA
15000 lbs 6804 kgs
973 lbs 441 kgs
1176 lbs 533 kgs
1.5 inch 38 mm
0.75 inch 19 mm
0.75 inch 19 mm
4849 lbs 21570 N
12.75 inches 324 mm
24.25 inches 616 mm