Wire Rope
Follow the wire rope manufacturer's instructions. At a minimum, observe the following guidelines.
1.
Clean with a brush or steam to remove dirt, rock dust or other foreign material on the surface of the wire rope.
• Do not use an acid-based solvent. Only use cleaning fluids specified by the wire rope manufacturer.
2.
Apply a wire rope lubricant, Ingersoll-Rand LUBRI-LINK-GREEN or ISO VG 100 oil.
3.
Brush, drip or spray lubricant weekly, or more frequently, depending on severity of service.
The use of replacement parts other than Ingersoll-Rand Material Handling may invalidate the Company's warranty. For prompt service and
genuine Ingersoll-Rand Material Handling parts provide your nearest Distributor with the following:
1.
Complete model number and serial number as it appears on the nameplate.
2.
Part number and part name as shown in parts manual.
3.
Quantity required.
Return Goods Policy
Ingersoll-Rand will not accept any returned goods for warranty or service work unless prior arrangements have been made and written
authorization has been provided from the location where the goods were purchased.
Winches which have been modified without Ingersoll-Rand approval, mishandled or overloaded will not be repaired or replaced under
warranty.
Disposal
When the life of the winch has expired, it is recommended that it be disassembled, degreased and parts separated as to materials so that they
may be recycled.
Winch repair and maintenance should only be carried out by an Authorized Service Repair Center. Contact your nearest Ingersoll-Rand
office for details.
The original language of this manual is English.
Winch Parts and Maintenance information is available in English by requesting the following publication:
FA2A: Parts, Operation and Maintenance Manual Form Number MHD56117.
FA2.5A: Parts, Operation and Maintenance Manual Form Number MHD56114.
FA5A: Parts, Operation and Maintenance Manual Form Number MHD56087.
CAUTION
PARTS ORDERING INFORMATION
SERVICE AND MAINTENANCE
12