socomec ATyS 3e Notice D'utilisation page 96

Automatic Transfer Switch
CONNECTIONS
ATyS 6s, 6e
Voltage sensing and power supply kit
OTHER CONFIGURATIONS
The kit can be adapted to other configurations but
requires connections or programming modification.
>
Voltage sensing and power supply kit mounting
procedure
>
STEP 1
Network
>
STEP 2
Sources (cables) entry
>
STEP 3
Sources / Switches cabling
and connectors plugging
Refer to following paragraphs for steps description
(1) Not required in case of pre-set neutral on the left kit from factory.
96
ATyS
Network 230 / 400 Vac
Network 127 / 230 Vac
Bottom entry
Top entry
Priority network
connected to switch I
Priority network
connected to switch II
Power circuits
Control circuits
Voltage sensing and
power supply kit
>
No action
>
A & B wires position modification
>
Kit to mount downstream
>
Kit to mount upstream
>
Connectors to plug in (on control module)
according to sources entry
>
Connectors to plug in (on control module)
according to sources entry
SOCOMEC - Réf.: 531 848 F