Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Automatic Transfer Switch
OPERATION
ATyS 6e
Operation
CONTROL
, 0,
(ACCESSIBLE IN AUT MODE)
1
2
It can be activated from:
- operation mode. It is possible to select the position of
the changeover switch ( , O,
- dry contacts. It is the possible to select the position
of the changeover switch (
inputs (terminals 313 to 317),
- communication optional module
- interface ATyS D20.
>
Remote activation
This mode is activated by closing terminals 313 and 317.
Changeover switch position depends on orders present
between terminal 317 and terminals 314-315-316.
>
Keypad activation
Select required position PS1, PSO or PS2:
Press "mode" push button
Yes is displayed on the screen for active position
Select a new position (from 1 to 0):
1 2
1 2
1 2
120
ATyS
1
2
) from keypad,
1
, O,
2
) from specific
Presentation
Operational modes
Programming
Operation
Visualisation
Automatic sequences
>
Description
Electrical operation of the changeover switch to reach
position: PS1, PSO, PS2 ( , O or
ches configuration (source
II).
The remote control has priority in automatic
mode. The product keeps in control mode
after transfer sequence.
6s 6e
1 2
1
2
) according to swit-
1
connected to switch I or
SOCOMEC - Réf.: 531 848 F
Publicité
Table des Matières
