Visualisation
PRESENTATION
• This mode allows parameters to be displayed inde-
pendently from the selector
• No code required to access parameters visualisation
• Without any action during 5 minutes on the keypad,
the LCD displays voltage available on active network.
In case of changeover switch on 0 position, priority
network voltage is displayed.
Navigation in visualisation mode:
• Press "up" and "bottom" push buttons to access required parameter
• Press "left" and "right" push buttons to navigate in the different menus
SOCOMEC - Réf.: 531 848 F
/ AUT switch position
Automatic Transfer Switch ATyS
OPERATION
ATyS 6s & 6e
121