FLUVO C2G-rondo Notice D'utilisation page 45

4.11 Electrical conncections, general
Warning! - Danger to life by electric shock
There is a danger of electric shock if the installation is carried out improperly!
The electrical connections may only be performed by a certified electrician or an electrical
installation company approved by the competent central electricity generating board. Also
refer to the standard DIN VDE 1000-10/1995-5.
Please note:
• The mains connection may only be made to a non-detachable connection.
• No conductive connection may exist between metal parts of the motor and the water.
• The mains supply cable must be provided with an all-pole disconnection switch with a
contact gap of 3 mm.
• Connect an equipotential bonding connector with a cross-section of 10 mm2 to the mar-
ked connection terminal of the motor (on the motor base or next to the terminal box).
C2G-rondo
27201-C
OPERATOR´S MANUAL
Schmalenberger GmbH + Co.
D-72072 Tübingen / Germany
45