- Making sure that the mobile pin is inserted in one of the fastening bolt holes (see Fig. 16d).
- fi t the cone on the handle, using the extension if necessary (see table for using cen-
tring and clamping accessories in relation to wheel type in this manual)
- fi t the handle (a) in the centre hole and turn clockwise fully (Fig. 16e).
5.3.a Loading with lift p.l.
- Use the lever
(Fig. 16f - 16g - 16h -16i), making sure the mobile pin is inserted in one of the
holes of the fi xing bolts (see Fig. 16d).
User manual Aquila Tornado
16d
to raise the wheel until it is in position on the turntable
16f
16e
16g
143