Accessories Included With The Machine; Optional Accessories Supplied On Request; Specified Conditions Of Use - Mondolfo Ferro TBE160 MATIC Manuel D'utilisation

ACCESSORIES INCLUDED WITH THE MACHINE

- Rim pliers
The locking grip, when fixed firmly to the rim edge prior to mounting, makes it easier to
lift the tyre, insert it into the rim well and keep it in position.
- Washer clamp
A pair of clamps to apply to the seat of the ring to block it during the bead breaking phase.
- Side ring lever
- Bead lifting lever
The bead lifting lever keeps the bead in position on the tool when demounting agricultural
wheels.

OPTIONAL ACCESSORIES SUPPLIED ON REQUEST

Please refer to the relevant accessories catalogue.

SPECIFIED CONDITIONS OF USE

The tyre changer was designed exclusively for tyre mounting and demounting.
WARNING
Any use other than those described in this manual is to be considered improper and
unreasonable.
DANGER
The manufacturer does not intend the machine to be used for inflation operations. If
the operator decides to proceed with partial bead insertion in the tyre on the machine
using his own equipment, a pressure of 0.5 bar must not be exceeded (unless the tyre
manufacturer does not require lower pressure levels), as indicated in the UNI Standard
10588 dated 09/96.
CAUTION
Do not clean or wash the wheels mounted on the machine with compressed air or jets
of water.
WARNING
It is advisable to use only original tools for working.
Figure 10 shows the operator's positions during the various work phases:
A Positioning the wheel on the turntable
B Inner bead breaking
C Outer bead breaking, demounting and mounting.
- E - Operator's manual
nGlISH
67