ERRORS
E132
Communication error with p3k
E161
Upper bead breaker position not rea-
ched
E162
Lower bead breaker position not rea-
ched
E163
Incomplete tool rotation or sensors not
detected
E164
Wheel diameter not reached
E166
Tool work position not reached
9. ENVIRONMENTAL INFORMATION
Following disposal procedure shall be exclusively applied to the machines having the
crossed-out bin symbol on their data plate.
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these substances
and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the
usual municipal waste but must be separately collected for their proper
treatment. The crossed-out bin symbol, placed on the product and on this
page, reminds the user that the product must be disposed of properly at
the end of its life.
In this way it is possible to prevent that a non specifi c treatment of the
substances contained in these products, or their improper use, or improper
use of their parts may be hazardous to the environment or to human health.
Furthermore, this helps to recover, recycle and reuse many of the materials contained
in these products.
Electrical and electronic manufacturers and distributors set up proper collection and
treatment systems for these products for this purpose.
At the end of the product's working life, contact your supplier for information about disposal
procedures. When you purchase this product, your supplier will also inform you that you
may return another worn-out appliance to him free of charge, provided it is of the same
type and has provided the same functions as the product just purchased.
Any disposal of the product performed in a different way from that described above will
be liable to the penalties provided for by the national regulations in force in the country
where the product is disposed of.
Further measures for environmental protection are recommended: recycling of the inter-
nal and external packaging of the product and proper disposal of used batteries (only if
contained in the product).
Your help is crucial in reducing the amount of natural resources used for manufacturing
electrical and electronic equipment, minimise the use of landfi lls for product disposal
and improve the quality of life, preventing potentially hazardous substances from being
released in the environment.
User manual Aquila Tornado
SOLUTION
contact technical support if error persists
Pass to manual mode
Pass to manual mode
contact technical support if error persists
Set position again
Contact support service
195