Touch Screen Calibration - Mondolfo Ferro Aquila Tornado Manuel D'utilisation

To activate the updated Database, perform the
ACTIVATE TPMS VERSION procedure described
previously.
RESET TPMS
1. To reset the TPMS if necessary, select RESET
TPMS then press the confirm button
(Fig. 43).
REINITIALISE TPMS
1. To reinitialise the TPMS if necessary, select RE-
SET TPMS then press the confi rm button
(Fig. 44).
5.9.i. Touch screen calibration
1. Select TOUCH SCREEN CALIBRATION then press
the confi rm button
For greater precision, wear gloves when carrying out calibration.
2. Touch the 5 crosses displayed on the touch scre-
en in sequence with your fi nger (Fig. 45a). Do not
use a pointed object such as a pencil to touch the
screen, as this may cause miscalibration.
3. After calibrating, touch the display with your
fi nger (Fig.45b) and check that the pointer follows
the movements of your fi nger. Otherwise, repeat
the procedure.
4. Select one of the following:
- SAVE to save calibration
- CANCEL to exit calibration without saving
- RESTART CALIBRATION to repeat the procedure.
174
(Fig. 45).
CAUTION!
User manual Aquila Tornado
43
44
45
45a
45b