Chimney Cowl - Bronpi KENIA Série Instructions D'installation, D'utilisation Et D'entretien

Decompression chamber
CAMARA DE DESCOMPRESION
Rock wool insulation
AISLAMIENTO LANA DE ROCA
Protect the inner
PROTEGER LAS PARTES
walls of the wook
INTERNAS DE LA MADERA
Rock wool insulation
AISLAMIENTO LANA DE ROCA
Cold air entry
ENTRADA AIRE FRIO

4.3 CHIMNEY COWL

The chimney draft also depends on the chimney cowl.
The chimney cowl should assure the smoke discharge even during windy days, having into account that it must exceed the top of the roof
(see drawing D46).
(1) Industrial chimney of
prefabricated elements
that allow a good smoke
extraction.
D46
The chimney cowl must comply with the following requirements:
• It must have the same interior section of the insert.
• It must have an usable exit section that is two times the one of the interior of the chimney.
• It must be constructed so that the rain, snow or any other object do not enter inside.
• It must be easily accessible in order to do servicing and cleaning tasks.
It the chimney cowl is metallic, due to its own design adapted to the diameter of the pipe, the smoke discharge is assured. There are different
models of metallic chimney cowl, fixed, anti-return, and rotary or extractor.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Metallic channel
CONDUCTO METALICO
MAXIMA INCLINACION 45º
maximum inclination 45º
50 cm
Grate
REJILLA
Exit grate of the convection air
REJILLA SALIDA AIRE CONVECCION
Rock wool insulation
AISLAMIENTO LANA DE ROCA
5 cm
Space between the pipe and
ESPACIO ENTRE EN TUBO Y
the sealed channel EL CONDUCTO SELLADO
Grate
REJILLA
Space between the cladding and the insert
ESPACIO ENTRE EL REVESTIMENTO Y EL INSERT
5 mm
Cold air entry
ENTRADA AIRE FRIO
Cold air entry
ENTRADA AIRE FRIO
Wall
PARED
D45
D38
(2) Traditional chimney. The
proper exit section must be,
at least, two times the interior
section of the chimney, the best
is 2.5 times
3) Chimney with interior cone
smoke deflector.
39 INSERTS