Publicité
Les langues disponibles
Les langues disponibles
lift/total head.
8.
Defective slide
locking ring.
9.
Pump moving
w heel not fitted
correctly.
10. Damaged pump
moving w heel.
11. Irregular engine
operation.
Vibration or
1. Too high suction
noisy
lift/total head.
operation
2. Foreign particle
blocks the suction
piping and/or the
pump moving
w heel.
3. Unstable
installation.
4. Unstable machine
installation.
5. Damaged pump
moving w heel.
6. Other technical
defect.
The engine
1.
Low fuel.
does not
start or turns
off during
2.
No ignition
operation.
spark.
3.
Clogged
carburettor.
4.
Clogged air
filter.
5.
Activated Auto
Stop because of
low engine oil
level.
6.
Other technical
defect.
installation so
that the suction
lift/total head
does not
exceed
maximum
value.
8.
Replace the
slide locking
ring.
9.
Place the pump
moving w heel
correctly.
10. Replace the
pump moving
w heel.
11. Contact the
customer
service.
1.
Change the
installation so
that the suction
lift/total head
does not
exceed
maximum
value.
2.
Remove
foreign particle.
3.
Stabilize the
installation.
4.
Ensure stable
position of the
machine.
5.
Replace the
pump moving
w heel.
6.
Contact the
customer
service.
1.
Open the
gasoline cock
and/or refuel.
2.
Check the
ignition sw itch.
Or check the
ignition plugs.
3.
Clean the
carburettor.
4.
Clean air filter.
5.
Replenish
engine oil.
6.
Contact the
customer
service.
15
Publicité
