Recommended Separation Distances; Electromagnetic Emissions - Comeg DUO Full HD Manuel D'utilisation

8
Electromagnetic compatibility

8.2 Recommended separation distances

The medical device is designed to be used in an electromagnetic environment in which
interferences caused by RF radiation are controlled.
The user or installer of the medical device can help prevent any electromagnetic interference
by applying a minimum distance, according to the maximum power of the radio-frequency
transmission equipment.
Warning: You should avoid using this device alongside other devices or stacked with them,
since that could cause incorrect operation. If such use is necessary you should
carefully observe this device and the other devices to check that they are operating
normally.

8.3 Electromagnetic emissions

The medical device is designed for use in the electromagnetic environment described in the
table below. The user and/or installer must therefore ensure that the medical device is used in
the environment described below.
Emission test
Electromagnetic
radiation disturbance
(Radiated emissions)
(CISPR 11)
Disturbance voltage at
power terminals
(Conducted emissions)
(CISPR 11)
Harmonic current
emission
(IEC 61000-3-2)
Voltage variations,
voltage fluctuations and
flicker
(IEC 61000-3-3)
Conformity Electromagnetic environment – comments
The medical device uses RF energy for its internal
Group 1
operation.
Class B
Professional healthcare facility environment and
Conforming
home healthcare environment.
Conforming
77