Comeg DUO Full HD Manuel D'utilisation page 63

5
Use of the device
5.2.2 Focussing
• Use the focussing ring [F1] on the sensor lens to focus.
• Once the endoscope is connected and the source activated, slowly turn the ring until it is in a
position where objects are seen clearly.
• Focussing from suffi cient distance (d~5 cm) allows you to have suffi cient depth of fi eld for
the procedure without frequent focussing being required.
5.2.3 Capturing photos
Caution: Please note that the system does not have internal storage. If you wish to use the
"Capture" function, you must provide a storage system, such as a USB key.
Note: We recommend the use of a USB key in FAT32 format.
• To capture a photo, fi rst connect a USB key or external hard drive to the device [C3].
• An indicator light appears on the device screen, to the right of the capture button
displaying the storage medium detection status:
. White: N/A
. Orange: Storage medium detection in progress or photo being saved
. Green: Detection OK or photo captured successfully
. Red: Error
• When the indicator is green, you can take a photo by clicking the capture button, which
will have turned white
camera head.
• Your photo will be saved to your storage system in .tiff format.
Function unavailable
Function available
, or you can perform a short press of the main button on the
,
63