Comeg DUO Full HD Manuel D'utilisation page 61

4
Device installation
4.3 Connection to the camera head and light cable
• Connect the camera head connector [C8] to the control channel [C1].
• Connect the light cable to the control channel [C2]. The device has two types of connection:
. Storz by default on the device
®
. Olympus
®
4.4 Connection of the endoscope to the sensor.
• Connect the optics to the optical mount ring on the lens.
• Connect the light cable to the optics.
4
5
FREEZE / CAPTURE
ANTIMOIRE MODE
, provided on the rear of the device [D1].
1s.
1s.
61