Oil Capacity - Honda HSM1590i Manuel De L'utilisateur

Engine oil change
If the engine oil is dirty, engine wear will occur more rapidly. Change
the oil at designated intervals. Maintain the oil at the proper level.

OIL CAPACITY:

How to change the oil:
Drain the used oil when the engine is warm. Warm oil drains quickly
and completely.
1. Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, oil drain bolt and washer.
2. Allow the used oil to drain completely, then reinstall the oil drain
bolt, and new washer, and tighten the oil drain bolt securely.
OIL FILLER CAP/DIPSTICK
If you drain the oil immediately after stopping the engine, its
temperature will be high and may cause burns.
3. Fill with new recommended oil (see page
mark.
4. After changing the oil, reinstall the oil filler cap/dipstick and push it
in securely.
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for recycling. Do not throw in the trash or pour it
onto the ground.
1.1 L (1.2 US qt, 1.0 lmp qt)
UPPER
LIMIT
MARK
LEVEL
GAUGE
34
ENGINE OIL
DRAIN BOLT
) up to the upper limit
SEALING
WASHER
75