Honda HSM1590i Manuel De L'utilisateur page 54

MAIN SHIFT LEVER
MAIN SHIFT LEVER
DRIVE
CLUTCH
LEVER
AUGER CLUTCH SWITCH
5) Move the main shift lever fully to the
end of the forward low speed range
slowly and clear the snow.
When the auger hits against the
road or inclines to a side, adjust the
LOW
a u g e r h o u s i n g p o s i t i o n b y
RANGE
operating the auger housing control
switch.
When the snow is small in volume
or light in nature, move the main
shift lever to the high speed side.
Perform minor adjustment of the
FAST
main shift lever to stabilize the
RANGE
operating speed if necessary.
6) When the drive clutch lever is released,
the auger clutch switch indicator
(green) goes off, both the auger and
b l o w e r s t o p t u r n i n g , a n d t h e
snowblower stops moving.
To move from one place to another, or
to change direction, use the drive
clutch lever only. Release the drive
clutch lever once, then squeeze the
drive clutch lever again.
51